SUPER Q 5000 ACRYLIC ALKALI RESISTING PRIMER

SUPER Q 5000 ACRYLIC ALKALI RESISTING PRIMER

Super Q Concrete Primer Sealer

DESCRIPTION

  • SQ 5000 Acrylic Prime is formulated with a special Pure Acrylic Polymer for the resisting of alkali and efflorescence properties. Free of mercury and lead. Moisture resistant is the best.

TYPE

  • Modified Pure Acrylic Emulsion and very hard fillers to resist the alkaline and sea water. It has the water proofing. Adhesion power is the excellent.

APPLICATION AREA

  • New and old masonry surfaces, wall plasters, brickwork and soft boards.

CHARACTERISTICS

  • Excellent penetration power onto porous substrates of concrete and cement, thus providing a good base for the subsequent boards.
  • Outstanding alkaline resistant.
  • Anti-fungus and algae resistance properties.
  • Excellent efflorescence resistance.
  • Fast drying time.
  • Compatible with all kinds of water based emulsion paints.
  • Easy application. Can be applied by brush roller and spray.
  • Anti Bacteria and Anti-mould.
  • Can be applied in both interior and exterior surfaces.

USES

  • Specially designed as a primer sealer for new and old cement rendered surfaces such as; {Plastered walls, Concrete, Brickworks, Fiber Boards, Partition Panels, Internal And external servicing conditions, New and Repainting surfaces.}

COLOUR

  • White Only.

FINISH

  • Matt Finish.

APPLICATION DATA

METHODS

  • Airless or Conventional Spray, Brush, Roller

DILUTION

  • Use Clean water
  • 20-30% by Volume (Dilution is to improve the workability)

THEORATICAL COVERAGE

  • 12-14 sq.m/Ltrs(80-90 sq.m/5 Ltr)

Wet Film Thickness

  • 60-80 microns

Dry Film Thickness

  • 30-35 microns

SURFACE PREPARATION

  • Surface must be clean, dry and stable

Suggested Treatment

  1. Dirt/Paint

High Pressure jet washes

  1. Paint

Remove unstable old film by high pressure jet wash or scraper whichever is appropriate.

  1. Moisture

High moisture causes paint defect.

  1. Algae/Fungus

Removed by high-pressure wash and treat with CHEMIPOL (SANIPOL-75) solution.

Rinse again with clean water and leave to dry.

  1. Oil/Grease

Clean off with mild detergent and a little solvent. Wash thoroughly to remove all trace.

DRYING TIME

  • Touch Dry (30 minutes) 30°C

Hard dry (1 hour) 30°C

OVERCOATING TIME

  • 4 Hours minimum in normal conditions

CLEANING

  • Clean all equipment immediately with water after use.

GENERAL INFORMATION

Viscosity

  • 90 KU

Specific Gravity

  • 33  0.03 kg

Solid Content

  • 55 ± 2 %

Painting System

  • SQ 5000 Acrylic Alkali Resisting Primer 2×35microns
  • All SQ Grades Emulsions 2×30microns

Packing

  • 1 Liter , 5 Liter and 18 Liters

Storage

  • Store in a tightly sealed container in a cool and dry space.

Shelf life

  • Up to 18 months in a tightly sealed container.

Precaution

  • Avoid direct contact with sensitive skin. Use appropriate protective equipment.

The above information given is intended to give a description of the product performance under specific test conditions. Nevertheless, we cannot assume any responsibility for the use of it since circumstances under which the products are applied in practice are subjected to many variations. We serve the right to alter the given data without notice.